Equipped with an automatically reset motor protector, which prevents the motor from burning due to high temperature / high ampere and / or locked impeller.
*Semi open impeller enable cutting of delicate materials to prevent clogging.
*Enclosed channel non clog impeller, allows large passage preventing clogging and allowing effective drainage / dewatering for higher head applications with solids laden media.
WD WATER DETECTOR
*Pumps over 5.5kW are equipped with this device in the mechanical seal chamber to detect any water intrusion or infiltration.
*The device will send a warning signal to the control panel to prevent motor failure induced by water ingress and save maintenance cost.
*Dry type, high efficiency copper wound motors with F class insulation.
*The motors are produced under the strictest quality control procedures, the stator winding is impregnated with varnish resin and oven heated for up to 8 hours.
MTP-Motor Thermal Protector
A Motor Thermal Protector is embedded in the windings of the motor. The MTP will transmit a signal to a control panel when windings temperature reaches preset threshold.